Tech Specs
We only use the highest quality materials from reputable suppliers to provide you with industry leading waterproofing systems. Each of these products has proven credentials that document their uses, benefits and success.
The following technical documentation below includes suitable Adhesives, Scope of Works, Project Specifications, Quality Assurance, BRANZ Appraisals, compliance to Australian Standards and Low VOC Reports for our systems.
Tiling
When tiling directly over Wet-seal™ Enviro-coat Membranes, polymer modified, flexible cement-based tile adhesives are recommended. Wet-seal Enviro-coat Membranes have been independently tested and are compatible with quality C2S1 and C2S2 tile adhesives. Ensure that the tile glue is water based. Solvent based adhesives are not compatible with Wet-seal™ Enviro-coat Membranes. Premixed (Dispersion) tile adhesives are not recommended. All tiling is to be carried out to AS 3958.1- 2007 “A Guide to The Installation of Ceramic Tiles”.
Scope of Works
Scope of Works Enviro-coat IS 520 Internal Waterproofing
Scope of Works Enviro-coat DS 420 Decks & Balconies
Scope of Works Enviro-coat GS 220 Below Ground Waterproofing
Quality Assurance
ISO9001 Quality Assurance Certificate
AS/NZS 4858 & AS/NZS 4654 Test Certificates
BRANZ Appraisal Enviro-coat IS 520
BRANZ Appraisal Enviro-coat DS 420
CETEC VOC Reports
CETEC VOC Report Enviro-coat IS 520
CETEC VOC Report Enviro-coat DS 420
CETEC VOC Report Enviro-coat GS 220